Binding Tapes WD-1

Binding Tapes WD-4

Semi-conductive Shielding Tapes

Water-blocking Tapes

Semi-conductive Water-blocking Tapes

Flame-retardant Non-woven Tapes

Single-side semi-conductive copper wire Shielding tapes /SCCU Series

Composition:Polyester nonwoven , semi-conductive adhesive, copper wire with coating.

Mainly Use: Binding，separating and shielding applications for conductors in cables. Water-locking version is available.

Type: SCCU series

Thickness (mm) : 0.30mm---0.50mm
Mass per unit area (g/㎡) : 100---130 g/㎡
Tensile strength (N/cm) : 100 N/cm
Elongation (%) : 12%
Surface resistance ( ohm/□ ) : less than or equal to 200 ohm/□
Volume resistance ( ohm.cm ) : less than or equal to 10000 ohm.cm

***OD of Galvanized copper wire is 0.20±0.01mm, the distance between copper wires is 4mm.

And they are available upon request.

Other specifications are available on request.

Spool is ordered from 150mm-700mm. Width, ID are also available on request.